EPSRC logo
EPSRC Support by Research Topic in Materials testing & eng.

We classify grants using one or more research topics. Value is the total value of the grants awarded, not the proportion assigned to different research topics, so it does not show the level of investment in different research areas.

Grant TitlePrincipal
Investigator
OrganisationDepartmentTotal Grant
Value (£)
A Facility for Cryo-Enabled Multi-microscopy for Nanoscale Analysis in the Engineering and Physical Sciences (Cryo-EPS)Giuliani, Dr FImperial College LondonMaterials 10,294,044
A Moving Cracking Story: Designing against Hydrogen Embrittlement in TitaniumDye, Professor DImperial College LondonMaterials 652,823
A Moving Cracking Story: Designing against Hydrogen Embrittlement in TitaniumGalindo-Nava, Dr EUniversity of CambridgeMaterials Science & Metallurgy 266,043
Adaptive Laser Induced Phased Arrays (ALIPA)Stratoudaki, Dr TUniversity of StrathclydeElectronic and Electrical Engineering 1,072,241
Advanced ceramics from liquid feedstock for aerospace propulsionHussain, Dr TUniversity of NottinghamFaculty of Engineering 1,736,743
CELLCOMP: Data-driven Mechanistic Modelling of Scalable Cellular Composites for Crash Energy AbsorptionTan, Dr WQueen Mary University of LondonSchool of Engineering & Materials Scienc 392,388
Certification for Design - Reshaping the Testing PyramidThomsen, Professor OTUniversity of BristolAerospace Engineering 6,924,663
CMMI-EPSRC: Thermoacoustic response of Additively Manufactured metals: A multi-scale study from grain to component scalesPatterson, Professor EAUniversity of LiverpoolMech, Materials & Aerospace Engineering 432,184
Cornerstone: Mechanical Engineering Science to Enable Aero Propulsion FuturesGarvey, Professor SUniversity of NottinghamFaculty of Engineering 6,143,615
Dial-up Engineered Microstructures for Advanced Additively Manufactured Metals (DEMAMM)Tuck, Professor CJUniversity of NottinghamFaculty of Engineering 1,809,056
ECCS - EPSRC Development of uniform, low power, high density resistive memory by vertical interface and defect designDriscoll, Professor JLUniversity of CambridgeMaterials Science & Metallurgy 384,242
Engineering Photonics: Sensor and Instrumentation Development and ApplicationTatam, Professor RPCranfield UniversitySch of Engineering 1,363,268
EPSRC Centre for Doctoral Training in Composites ManufacturePartridge, Professor IKUniversity of BristolAerospace Engineering 3,764,683
EPSRC Centre for Doctoral Training in Future Innovation in Non-Destructive evaluation (FIND)Drinkwater, Professor BUniversity of BristolMechanical Engineering 4,176,096
EPSRC Centre for Doctoral Training in Materials for Demanding EnvironmentsWithers, Professor PUniversity of Manchester, TheMaterials 4,291,882
EPSRC Centre for Doctoral Training in Materials for Demanding EnvironmentsWithers, Professor PUniversity of Manchester, TheMaterials 4,291,882
EPSRC Centre for Doctoral Training in Micro- and NanoMaterials and TechnologiesDorey, Professor RAUniversity of SurreyMechanical Engineering Sciences 3,229,309
EPSRC Centre for Doctoral Training in Quantitative NDECawley, Professor PImperial College LondonMechanical Engineering 3,069,697
EPSRC UK Acoustics Network PlusHoroshenkov, Professor KVUniversity of SheffieldMechanical Engineering 1,418,895
EPSRC-SFI: An ocean microlab for autonomous dissolved inorganic carbon depth profile measurementMaguire, Professor PUniversity of UlsterNanotechnology and Adv Materials Inst 602,640
Establishing adaptive ultrasonics through shape memory materialsFeeney, Dr AUniversity of GlasgowSchool of Engineering 474,044
ESTEEM: Energy efficient and Safe out-of-oven manufacTuring for compositE materials with intEgrated MultifunctionalitiesZhang, Dr HQueen Mary University of LondonSchool of Engineering & Materials Scienc 395,947
Experimental Flight Dynamics Testing for Highly Flexible AircraftLowenberg, Professor MUniversity of BristolAerospace Engineering 651,494
Failure process and optimal design of hybrid adhesive joints - a microscale experimental and numerical approachHou, Dr XLancaster UniversityEngineering 217,561
Fatigue Testing beyond ExtremesGong, Dr JUniversity of OxfordMaterials 1,122,564
Future Advanced Metrology HubJiang, Professor Dame XUniversity of HuddersfieldSch of Computing and Engineering 10,456,170
High reliability Interconnects: New Methodologies for Lead-free SoldersBailey, Professor CUniversity of GreenwichMathematical Sciences, FACH 105,910
High Reliability Interconnects: New Methodologies for Lead-free SoldersGourlay, Dr CMImperial College LondonMaterials 1,299,714
High-Performance Smart Ceramic Coatings on Light AlloysMingo, Dr BUniversity of Manchester, TheMaterials 270,762
Mechanisms and Characterisation of Explosions (MaCE)Tyas, Professor AUniversity of SheffieldCivil and Structural Engineering 1,284,838
Mechanistic Understanding of the Damage and Fracture in Ceramic-Matrix Composites under Extreme ConditionsLiu, Dr DUniversity of BristolPhysics 277,790
MMBOP: Multiphysics Modelling of BiOdegradable PolymersBrassart, Professor LUniversity of OxfordEngineering Science 278,442
MMBOP: Multiphysics Modelling of BiOdegradable PolymersBrassart, Professor LUniversity of OxfordEngineering Science 278,442
MMBOP: Multiphysics Modelling of BiOdegradable PolymersBrassart, Professor LUniversity of OxfordEngineering Science 278,442
Model constrained x-ray tomographic reconstruction, a blueprint for better imagesBlumensath, Dr TUniversity of SouthamptonFaculty of Engineering & the Environment 505,019
Nanovoids for Developing New Hydrogen-resistant Materials (NanoHMAT)Martinez-Paneda, Dr EImperial College LondonCivil & Environmental Engineering 202,160
NDE, DEsign and Engineering Critical Assessments (NDECA): Bridging the gapsLarrosa, Dr NUniversity of BristolMechanical Engineering 283,717
Next Generation Electro-Chemo-Mechanical Models for Hydrogen Embrittlement (NEXTGEM)Martinez-Paneda, Dr EImperial College LondonCivil & Environmental Engineering 457,833
Next Generation Fibre-Reinforced Composites: a Full Scale Redesign for CompressionShaffer, Professor MImperial College LondonMaterials 6,205,244
Next generation of high-performance impact resistant composites with visibility of damageFotouhi, Dr MUniversity of GlasgowSchool of Engineering 241,210
Novel Active Soldering; Creating Enhanced joints Near-ambient Temperature (NASCENT)Goodall, Professor RUniversity of SheffieldMaterials Science and Engineering 212,484
Patterns recognition inside shear bands: tailoring microstructure against localisationBorodin, Dr IUniversity of Manchester, TheMechanical Aerospace and Civil Eng 282,347
RCUK Catapult Researchers in Res. (HVM MTC)-Surface measurement methods for manufacturing, functioning & metrology of additively manufactured productsLou, Dr SUniversity of HuddersfieldSch of Computing and Engineering 50,000
RCUK Catapult Researchers in Residence award (High Value Manufacturing AFRC) - Thermal Metrology at the Advanced Forming Research CentreWillmott, Dr JRUniversity of SheffieldElectronic and Electrical Engineering 50,000
RCUK Catapult Researchers in Residence award (High Value Manufacturing WMG) - Optimization of hybrid adhesive joints for automotive applicationsHou, Dr XLancaster UniversityEngineering 50,000
RCUK Catapult Researchers in Residence award HVM CPI - Digital - Ultra fast in-line surface metrology for roll-to-roll processMuhamedsalih, Dr HUniversity of HuddersfieldSch of Computing and Engineering 50,000
Rich Nonlinear Tomography for advanced materialsMidgley, Professor PAUniversity of CambridgeMaterials Science & Metallurgy 236,595
Rich Nonlinear Tomography for advanced materialsKorsunsky, Professor AMUniversity of OxfordEngineering Science 488,160
Rich Nonlinear Tomography for advanced materials (LEAD)Lionheart, Professor WRBUniversity of Manchester, TheMathematics 635,422
SEE MORE MAKE MORE: Secondary Electron Energy Measurement Optimisation for Reliable Manufacturing of Key MaterialsRodenburg, Dr CUniversity of SheffieldMaterials Science and Engineering 1,171,727
See More Make More: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationHondow, Dr NUniversity of LeedsChemical and Process Engineering 84,068
See More Make More: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationJepson, Dr MLoughborough UniversityMaterials 78,818
SEE MORE MAKE MORE: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationPratt, Dr AUniversity of YorkPhysics 562,339
SINDRI: Synergistic utilisation of INformatics and Data centRic Integrity engineeringKnowles, Professor D MUniversity of BristolMechanical Engineering 2,482,493
The integration of photovoltaic devices with carbon-fibre compositesLidzey, Professor DUniversity of SheffieldPhysics and Astronomy 900,923
The Mechanisms of Fatigue of Viscoeleastic Multilayer Paint Systems on WoodYoung, Professor CUniversity of GlasgowSchool of Culture & Creative Arts 285,011
Tomographic ImagingWithers, Professor PUniversity of Manchester, TheMaterials 238,693
Tomographic Imaging: UK Collaborative Computational ProjectsWithers, Professor PUniversity of Manchester, TheMaterials 296,693
UK Aerospace Research Consortium NetworkGray, Professor I GCranfield UniversitySch of Aerospace, Transport & Manufact 900,994
Upscaling environment-friendly cavitation melt treatment (UltraMelt #2)Pericleous, Professor KAUniversity of GreenwichMathematical Sciences, FACH 329,613
Upscaling environment-friendly cavitation melt treatment (UltraMelt2)Eskin, Professor DBrunel University LondonBCAST 397,618
Upscaling environment-friendly cavitation melt treatment (UltraMelt2)Tzanakis, Professor IOxford Brookes UniversityFaculty of Tech, Design and Environment 261,433
Wetting of Auxetic MetamaterialsMcHale, Professor GUniversity of EdinburghSch of Engineering 439,269
Wetting of Auxetic MetamaterialsAlderson, Professor ASheffield Hallam UniversityCollege of Business, Technology & Eng 318,566

Total Number of Grants: 64
Total Value of Grants: £92,406,961

The grant value may include the cost of access to facilities (these funds are not awarded to the grant holding organisation).