EPSRC logo
EPSRC Support by Research Area in Materials Engineering - Metals & Alloys

Research areas are used to describe EPSRC's portfolio of excellent long term research and high quality postgraduate training.

Grants are classified using one or more research areas. All the grants listed below have some relevance to this research area. The value of the investment is the total awarded by EPSRC and does not reflect the proportion assigned to this research area.

We always try to ensure that grants on the web contains the most recent information but it is possible that some might be slightly out of date.

Grant TitlePrincipal
Investigator		OrganisationDepartmentTotal Grant
Value (£)
A Moving Cracking Story: Designing against Hydrogen Embrittlement in TitaniumDye, Professor DImperial College LondonMaterials 652,823
Advanced Research into Crystallographic Anisotropy & Nucleation Effects in single crystals (ARCANE)Green, Professor NRUniversity of BirminghamMetallurgy and Materials 4,496,423
Aerospace casting for the hybrid electric futureWithey, Professor PUniversity of BirminghamMetallurgy and Materials 937,245
AFM-based nano-machining: developing and validating a novel modelling approach for effective process implementation in nanotechnology applicationsBrousseau, Professor EBCardiff UniversitySch of Engineering 692,656
Brunel University - Equipment AccountFan, Professor ZBrunel University LondonMechanical and Aerospace Engineering 3,855,000
CMMI-EPSRC: Multi-Driver Furnace Processing of Magneto-Functional MaterialsStaunton, Professor JBUniversity of WarwickPhysics 283,132
CMMI-EPSRC: Quantitative Characterization of Mission Critical Microstructures of Engineering Metals with Diffusive UltrasoundLan, Dr BImperial College LondonMechanical Engineering 610,556
Correlative Analysis of Crystals in 3DChen, Professor BUniversity of LeicesterEngineering 2,501,463
Decarbonisation Of Food Cold Chain Through Integrated Hydrogen TechnologiesLing, Dr SUniversity of NottinghamFaculty of Engineering 972,583
Defect dynamics in energy materialsFitzgerald, Dr SUniversity of LeedsApplied Mathematics 816,591
Development of magnetic force biotechnology to facilitate neural regenerationTelling, Professor NDKeele UniversityInst for Science and Tech in Medicine 805,899
Dispersion Strengthened Magnesium Alloys - Solidification of NanocolloidsNadendla, Professor HBrunel University LondonBCAST 757,017
Doing More With Less: A Digital Twin of state-of-the-art and emerging high value manufacturing routes for high integrity titanium alloy componentsJackson, Professor MUniversity of SheffieldMaterials Science and Engineering 2,608,542
EPSRC and SFI Centre for Doctoral Training in Advanced Metallic Systems: Metallurgical Challenges for the Digital Manufacturing EnvironmentGoodall, Professor RUniversity of SheffieldMaterials Science and Engineering 5,474,979
EPSRC Centre for Doctoral Training in Advanced Metallic Systems - Challenges in Future Metals ManufacturingGoodall, Professor RUniversity of SheffieldMaterials Science and Engineering 3,533,533
EPSRC Centre for Doctoral Training in Functional Industrial CoatingsSullivan, Professor JHSwansea UniversityCollege of Engineering 4,610,425
EPSRC Centre for Doctoral Training in Materials for Demanding Environmentswithers, Professor PUniversity of Manchester, TheMaterials 4,291,882
EPSRC Core Equipment Award 2022 - Imperial College LondonRyan, Professor MImperial College LondonResearch Office 1,545,258
EPSRC Network for Engineering Porous Materials at Multiple Scales (EPoMM)Bowen, Professor CUniversity of BathMechanical Engineering 262,122
Establishing adaptive ultrasonics through shape memory materialsFeeney, Dr AUniversity of GlasgowSchool of Engineering 474,044
Fatigue Testing beyond ExtremesGong, Dr JUniversity of OxfordMaterials 1,122,564
Future Liquid Metal Engineering HubFan, Professor ZBrunel University LondonBCAST 10,522,611
High Temperature Superconductors for Fusion TechnologiesSpeller, Professor SUniversity of OxfordMaterials 1,988,757
High-temperature Electromagnetic Instrumentation for Metal ProductionDavis, Professor CUniversity of WarwickWMG 317,818
High-temperature Electromagnetic Instrumentation for Metal Production (Hi-TEMP)Peyton, Professor AUniversity of Manchester, TheElectrical and Electronic Engineering 503,138
Invited Resource Only Strategic Equipment bid for Rapid Alloy ProcessingDavis, Professor CUniversity of WarwickWMG 63,311
LightForm: Embedding Materials Engineering in Manufacturing with Light AlloysQuinta da Fonseca, Professor JUniversity of Manchester, TheMaterials 4,827,337
Made Smarter Innovation - Materials Made Smarter Research CentreTodd, Professor IUniversity of SheffieldMaterials Science and Engineering 4,049,204
Manufacturing by Designwithers, Professor PUniversity of Manchester, TheMaterials 1,612,580
MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder ProcessesTodd, Professor IUniversity of SheffieldMaterials Science and Engineering 10,724,131
Modelling radiation resistant low activation High Entropy AlloysSmith, Professor RLoughborough UniversityMathematical Sciences 337,695
Nanovoids for Developing New Hydrogen-resistant Materials (NanoHMAT)Martinez-Paneda, Dr EImperial College LondonCivil & Environmental Engineering 202,160
National Facility for High Speed and High Temperature X-Ray DiffractionBowen, Dr JThe Open UniversityFaculty of Sci, Tech, Eng & Maths (STEM) 644,851
National Research Facility for Lab X-ray CTBurnett, Dr TUniversity of Manchester, TheMaterials 10,097,652
New Wire Additive Manufacturing (NEWAM)Williams, Professor SWCranfield UniversitySch of Aerospace, Transport & Manufact 5,886,209
Next Generation Electro-Chemo-Mechanical Models for Hydrogen Embrittlement (NEXTGEM)Martinez-Paneda, Dr EImperial College LondonCivil & Environmental Engineering 457,833
Nickel Superalloy Design for Corrosion ResistancePedrazzini, Dr SImperial College LondonMaterials 741,689
Novel Active Soldering; Creating Enhanced joints Near-ambient Temperature (NASCENT)Goodall, Professor RUniversity of SheffieldMaterials Science and Engineering 212,484
Novel Brazing Filler Metals using High Entropy AlloysGoodall, Professor RUniversity of SheffieldMaterials Science and Engineering 1,092,461
Patterns recognition inside shear bands: tailoring microstructure against localisationBorodin, Dr IUniversity of Manchester, TheMechanical Aerospace and Civil Eng 282,347
Performance-driven design of Aluminium alloys for Additive Manufacturing (PAAM)Tzanakis, Professor IOxford Brookes UniversityFaculty of Tech, Design and Environment 358,184
Performance-driven design of aluminium alloys for additive manufacturing (PAAM)Eskin, Professor DBrunel University LondonBCAST 477,459
Performance-driven design of aluminium alloys for additive manufacturing (PAAM)Lee, Professor PUCLMechanical Engineering 335,214
Practice and theory in the design of martensitic steelsPaxton, Professor ATKings College LondonPhysics 378,451
Practice and theory in the design of martensitic steelsRainforth, Professor WMUniversity of SheffieldMaterials Science and Engineering 446,772
Predictive Multiscale Modelling Protocol of Adiabatic Shear Band Initiation in Manufacturing and Aerospace MaterialsGurrutxaga Lerma, Dr BUniversity of BirminghamMetallurgy and Materials 278,383
Prosperity Partnership Call 2 Strategic Students-Tata Steel and Swansea UniversityBrown, Professor SSwansea UniversityCollege of Engineering 288,991
Prosperity Partnership in Rapid Product DevelopmentLavery, Professor NPSwansea UniversityCollege of Engineering 2,431,506
Rich Nonlinear Tomography for advanced materialsKorsunsky, Professor AMUniversity of OxfordEngineering Science 488,160
Rich Nonlinear Tomography for advanced materialsMidgley, Professor PAUniversity of CambridgeMaterials Science & Metallurgy 236,595
Rich Nonlinear Tomography for advanced materials (LEAD)Lionheart, Professor WRBUniversity of Manchester, TheMathematics 635,422
Rigorous coarse-graining of defects at positive temperatureDuong, Dr HUniversity of BirminghamSchool of Mathematics 38,694
SINDRI: Synergistic utilisation of INformatics and Data centRic Integrity engineeringKnowles, Professor D MUniversity of BristolMechanical Engineering 2,482,493
STEP AluminiumFan, Professor ZBrunel University LondonBCAST 2,249,250
SUSTAIN Manufacturing HubWorsley, Professor DSwansea UniversityCollege of Engineering 10,852,989
Sustainable Additive ManufacturingWilliams, Professor SWCranfield UniversitySch of Aerospace, Transport & Manufact 1,665,172
Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM)Lee, Professor PUCLMechanical Engineering 331,295
Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM)Kao, Dr AUniversity of GreenwichMathematical Sciences, FACH 451,915
Thermal Recovery of Functional Coatings (TReFCo)Baker, Dr JSwansea UniversityCollege of Engineering 1,005,537
Tomographic Imaging: UK Collaborative Computational Projectswithers, Professor PUniversity of Manchester, TheMaterials 296,693
Transforming the Foundation Industries Research and Innovation Hub (TransFIRE)Jolly, Professor MCranfield UniversitySch of Aerospace, Transport & Manufact 4,836,821
Transforming the Foundation Industries: a Network+ Towards Value by InnovationReaney, Professor IMUniversity of SheffieldMaterials Science and Engineering 2,259,077
UK FIRES: Locating Resource Efficiency at the heart of Future Industrial Strategy in the UKAllwood, Professor JMUniversity of CambridgeEngineering 5,176,328
UKRI Interdisciplinary Centre for CircularMetalFan, Professor ZBrunel University LondonBCAST 4,437,440
York: Transforming Research-Oriented Software EngineeringHasnip, Dr PJUniversity of YorkPhysics 810,261

Total Number of Grants: 65
Total Value of Grants: £139,118,102

The grant value may include the cost of access to facilities (these funds are not awarded to the grant holding organisation).