EPSRC logo

Details of Grant 

EPSRC Reference: EP/L010321/1
Title: Algebraic modelling of 5 axis tool path motions
Principal Investigator: Cripps, Dr R
Other Investigators:
Researcher Co-Investigators:
Project Partners:
Delcam International plc
Department: Mechanical Engineering
Organisation: University of Birmingham
Scheme: Standard Research
Starts: 31 March 2014 Ends: 30 March 2017 Value (£): 275,025
EPSRC Research Topic Classifications:
Design & Testing Technology Manufacturing Machine & Plant
EPSRC Industrial Sector Classifications:
Related Grants:
Panel History:
Panel DatePanel NameOutcome
01 Oct 2013 Engineering Prioritisation Meeting 1 October 2013 Announced
Summary on Grant Application Form
The use of computers to aid the manufacturing process has been long established. In particular, the use of computer numerically controlled machines to progressively remove material from a solid block to produce a finished component is now an integral part of the component industry. The hardware, software and methodologies for material removal have all matured into state of the art software packages and multi-axis machining centres. Despite this, there remains issues with machining high precision components that should require little or no finishing. There are many parameters involved in the machining process and even when optimised the physical part may exhibit unexpected errors. These may be due to a number of effects (ignoring such issues as tool wear and vibration) including: simplifications made in the computer aided manufacturing software regarding the model of the cutting tool; the need to discretise the tool to send to machine tool controller; the need for the controller to re-interpolate the required tool path and the need to control the tool to follow the (newly re-interpolated) path.

To offset these effects, time consuming and expensive physical cutting trials are required in order to produce a high quality surface finish. An alternative would be to have the ability to accurately simulate the cutting process that predicts the true cutting conditions and reproduces the machined surface finish. It would be over ambitious to attempt to construct a simulation that is capable of modelling every aspect of the entire machining process in a single project. However, if a framework can be established and demonstrated for a manageable set of parameters, this could then be developed by others to incorporate other aspects including vibration, tool wear, etc. This project aims at providing such a framework for the realistic simulation of material removal using multi-axis machining tools and a robust, integrated framework for the modelling of tool path motions.

Previous work at the University of Birmingham has considered the problem of determining what the actual machined part is going to be. This work was based on the principle of generating surface normals to a CAD model of the part. Machining is then simulated by using an exact model of the cutting tool and using this to truncate the normals. This has been used successfully to predict the small cusps that can remain during manufacture. It is proposed to extend this approach to deal with more complicated surface forms so that defects can be predicted and hence means for attenuating them investigated.

Interest at the University of Bath has been in the use of geometric algebra to describe motions. Geometric algebra provides a framework in which rigid-body motions, both translation and rotations, can be handled in a common form. This allows techniques for free-form curves to be extended in a natural way to deal with free-form motions. It is proposed to investigate the use of the approach for describing the motion of the cutting tool and hence to improve means for interpolating (and re-interpolating) tool-path information.

Key Findings
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Potential use in non-academic contexts
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Description This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Date Materialised
Sectors submitted by the Researcher
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Project URL:  
Further Information:  
Organisation Website: http://www.bham.ac.uk