EPSRC logo

Details of Grant 

EPSRC Reference: EP/D04099X/1
Title: LUBRICATION OF HIGH-SLIDING MICROMACHINES
Principal Investigator: Spikes, Professor HA
Other Investigators:
Holmes, Professor A
Researcher Co-Investigators:
Project Partners:
Department: Mechanical Engineering
Organisation: Imperial College London
Scheme: Standard Research (Pre-FEC)
Starts: 01 September 2006 Ends: 30 June 2010 Value (£): 334,428
EPSRC Research Topic Classifications:
Eng. Dynamics & Tribology Microsystems
EPSRC Industrial Sector Classifications:
Aerospace, Defence and Marine
Related Grants:
Panel History:  
Summary on Grant Application Form
This project seeks to develop novel and effective ways of lubricating high-sliding MEMS. It is a collaboration between two research groups at Imperial College London, one specialising in MEMS and the other in tribology.One of the most important technological advances in the last 15 years has been the development of micro-electromechanical systems or MEMS. MEMS devices can be made cheaply and in very large numbers using silicon chip fabrication methods and they are now being used in a wide range of machines, from inkjet printers to motor cars. At present, one of the main factors that limits the use of MEMS is the friction and wear of the moving parts, since it turns out to be much more difficult to obtain low friction coefficients in micro-scale contacts than in macro-scale ones. This means that all of the MEMS devices currently in use are ones that require little or no sliding contact. However there is great interest in building micromachines with large amounts of sliding such as tiny gas turbine engines and generators. Such devices could be used to power mobile phones and other portable equipment such as survival gear, but the problem is how to lubricate them effectively.At present, most MEMS are either not lubricated at all or are lubricated by depositing a monolayer of organic molecules on their surfaces prior to use. However in high-sliding MEMS this layer is damaged and lost during sliding, resulting in high friction and wear. The applicants believe that successful lubrication of high-sliding MEMS will require some means of replenishing the lubricant film during prolonged MEMS operation. Therefore, in this project three novel ways of establishing a replenishing lubricant film in MEMS will be explored: vapour phase replenishment, the use of a thin, mobile liquid film and the operation of MEMS partially or wholly immersed in low viscosity liquid. This last possibility is the most controversial since it has generally been assumed up to now that the viscous drag forces created in an immersed MEMS device would be too large. However calculations by the applicants suggest that this should not be the case for some larger devices, in which case low viscosity lubricants containing additives may be an attractive option. If MEMS devices can be operated within a liquid environment then it makes possible not just lubrication by formation of a liquid film between rubbing parts - hydrodynamic lubrication - but also lubrication by additives dissolved in the liquid which adsorb and react with the rubbing surfaces - boundary lubrication.The project will first construct a MEMS tribometer in which friction can be monitored and wear measured using lubricated MEMS components. This instrument will then be used in conjunction with a second, millimeter-scale tribometer to test and develop the above three methods of lubricating MEMS.
Key Findings
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Potential use in non-academic contexts
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Impacts
Description This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Summary
Date Materialised
Sectors submitted by the Researcher
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
Project URL:  
Further Information:  
Organisation Website: http://www.imperial.ac.uk