| EPSRC Reference: |
EP/H025340/1 |
| Title: |
Mixed cation- and anion-exchange hybrid membranes for use in fuel cells, redox flow batteries and electrodialysis cells |
| Principal Investigator: |
Varcoe, Professor JR |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Chemistry |
| Organisation: |
University of Surrey |
| Scheme: |
Standard Research |
| Starts: |
14 June 2010 |
Ends: |
13 December 2013 |
Value (£): |
388,982
|
| EPSRC Research Topic Classifications: |
|
| EPSRC Industrial Sector Classifications: |
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
|
The research involves the development of hybrid polymer electrolyte membranes and membrane electrode assemblies (HyMEA) that contain distinct cation(proton)- and anion(alkali)-exchange phases with a defined interface or junction between the phases. Two different approaches will be investigated: Approach 1 (lower risk) will involve the fabrication of HyMEAs using commercially available Nafion ionomers and proton-exchange membranes along with Surrey's previously developed alkaline ionomer formulations and alkaline anion-exchange membranes. The second approach (higher risk involving more fundamental explorations) will involve the synthesis of innovative hybrid membranes from a single precursor polymer film where the distinct cation- and anion-exchange phases are separated by a chemical junction/interface and where there are no interferences from undesirable physical separation phenomena between the phases.The HyMEAs will firstly be evaluated in fuel cells with a preferred embodiment where the acidic phase is located at the anode and the alkaline phase is located at the cathode. The use of HyMEAs will allow the use of low humidity hydrogen and air gas supplies as the water generation in the operating fuel cells is at the cation-/anion-exchange junction, which is located away from the electrodes themselves (water generation in the electrodes in traditional fuel cells can disrupt the supply of the reactant gases, which leads to mass transport derived performance losses); the cation-/anion-exchange junction is ideally located inside the HyMEA for maximum retention of the hydration state of the polymer electrolyte membranes and films for maximum ionic conductivity. The synthetic approaches detailed above were deliberately chosen to allow for HyMEAs and hybrid membranes to be synthesised where the cation-/anion-exchange junctions can be located at controlled (and varying) distances from the anode and cathodes; hence the optimum location of water generation (e.g. near to the anode, near to the cathode, located dead centre) can be determined for each approach. The presence of a high pH cathode will also allow for the use of non-platinum (non-Pt) cathodes (the cathodes of traditional hydrogen fuel cells, where the oxygen reduction reaction kinetics are sluggish, contain the bulk of the Pt content; the anode electrokinetics are superior and hence significantly less Pt can be used at the anodes).Recently, hybrid (bipolar) membranes have been applied to technologies such as redox flow batteries and electrodialysis cells: therefore, the project will also evaluate if the application of the hybrid membranes developed above is pertinent to these technologies. The model systems for this impact assessment will be a vanadium redox flow battery and a sodium formate electrodialysis cell.PRINCIPAL AIMS: To develop a range of HyMEAs that are initially targeted for use in hydrogen fuel cells that require non-humidified gas supplies and that contain non-platinum-group-metal cathodes.ENSUING PROJECT AIMS: An initial feasibility study on the use of the developed hybrid membranes in electrodialysis cells and redox flow batteries to explore the potential impact of the developing technologies in non-energy generation applications (water technologies and energy storage).
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
http://www.surrey.ac.uk/chemistry/people/john_varcoe/ |
| Further Information: |
|
| Organisation Website: |
http://www.surrey.ac.uk |