| EPSRC Reference: |
EP/F001452/1 |
| Title: |
Multiscale x-ray imaging facility for monitoring and modelling structural evolution in situ |
| Principal Investigator: |
Lee, Professor P |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Materials |
| Organisation: |
Imperial College London |
| Scheme: |
Standard Research |
| Starts: |
06 February 2008 |
Ends: |
05 November 2011 |
Value (£): |
235,224
|
| EPSRC Research Topic Classifications: |
| Instrumentation Eng. & Dev. |
Lasers & Optics |
| Materials Characterisation |
|
|
| EPSRC Industrial Sector Classifications: |
| Aerospace, Defence and Marine |
Manufacturing |
| Construction |
Energy |
|
| Related Grants: |
|
| Panel History: |
| Panel Date | Panel Name | Outcome |
|
19 Jun 2007
|
Engineering Science (Components) Panel
|
Announced
|
|
|
Summary on Grant Application Form |
|
This proposal is a collaborative effort forming part of the Univ. of Manchester's initiative to establish a multidisciplinary X-ray imaging room housing a number of open 'beamlines/hutches' in the Unit for Stress & Damage Characterisation. Although the system will be open beamlines as with synchrotron sources, magnification will be achieved using spot sources and geometric enlargement. This adds many challenges when designing in situ rigs to load, heat and provide special environments for testing on these laboratory beamlines. Unlike synchrotron sources where the specimen is meters away from the source with room on all sides, the highest magnifications can only be obtained in laboratory sources if the specimen is only a few millimetres from the source. The objective of the research at Imperial College is to design, build and commission a rig to apply programmed tension, compression and thermal loading whilst rotating specimens with very high accuracy. The control systems for the instrument will be designed so that it may also be used at synchrotron sources (e.g. Diamond, ESRF) if the finer temporal resolution available at these high flux sources is required for specific experiments.A landmark experimental investigation of damage evolution in semi-solid Al-Cu alloy will be performed to demonstrate the capabilites of the apparatus.This new instrument, coupled with the high resolution (and phase contrast) tomography, will allow the direct observation of damage accumulation in a range of materials whilst under load and at temperatures as high as 1000C. Further, as the loading/thermal profiles applied will be programmable, the three dimensional evolution of phases within the material will be directly quantifiable and attributable to either thermal or strain driving forces. This in situ observation instrument will complement existing electron microscopy techniques by allowing phases in the 1 to 100 micron size range to be observed in 3D. The many applications of such an instrument are listed in the main proposal, including: damage and phase evolution during semi-solid processing, sintering processes (both metal and ceramic), fatigue crack propagation at elevated temperature, processing of bio-materials, and void nucleation and coalescence during creep.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
|
| Further Information: |
|
| Organisation Website: |
http://www.imperial.ac.uk |