| EPSRC Reference: |
EP/E003427/1 |
| Title: |
In Situ Calibration of Cohesive Zone Models for Composite Damage |
| Principal Investigator: |
Spearing, Professor SM |
| Other Investigators: |
|
| Researcher Co-Investigators: |
|
| Project Partners: |
|
| Department: |
Faculty of Engineering & the Environment |
| Organisation: |
University of Southampton |
| Scheme: |
Standard Research |
| Starts: |
13 November 2006 |
Ends: |
12 August 2010 |
Value (£): |
390,570
|
| EPSRC Research Topic Classifications: |
| Eng. Dynamics & Tribology |
Materials Characterisation |
|
| EPSRC Industrial Sector Classifications: |
| Aerospace, Defence and Marine |
|
|
| Related Grants: |
|
| Panel History: |
|
|
Summary on Grant Application Form |
|
The process for designing with composite materials remains highly dependent on mechanical testing. This is time consuming and expensive. A more efficient process would involve increased use of modeling and simulation to iterate on designs. The core problem lies in the lack of good models for the failure processes that determine the strength and durability of composite structures. These processes are complicated and occur at several lengthscales. An effective modeling approach would be capable of working across multiple lengthscales and yet fit within the numerical frameworks (typically finite element models) commonly used in structural design and analysis. Cohesive zone models (CZM) have recently received considerable attention as offering a numerically efficient means of meeting these aims. They are readily embedded in finite element models, and yet can capture some of the key mechanisms occurring at several lengthscales. However, for the most part these models have not been independently calibrated and therefore have limited predictive capability. This proposal aims to address this limitation by applying a novel experimental technique, high resolution X-ray tomography, in combination with penetrants or particles to enhance contrast, to obtain the necessary data to allow independent calibration of cohesive zone models.High resolution X-ray tomography can allow sub-micro displacement and spatial resolution and strain resolution of less than 100 microstrain. This should be more than sufficient resolution to capture the damage-modified strain and displacement fields relevant to determining failure of composite structures. Such high resolution requires use of high-energy synchrotron radiation, so this work will be conducted in collaboration with the European Synchrotron Radiation Facility at Grenoble. Lower resolution work (1-10 micron resolution) will be performed with a lab-scale tomographic imager at Southampton University to be partially purchased by this grant.In order to evaluate the efficacy of a cohesive zone model, an existing model created by collaborators at Rockwell Scientific will be used. This can be modified or substantially revised depending on the results of the experimental strain mapping. The problem of notch-tip damage and notched strength will be tackled as it represents a key test case that has hitherto proven difficult to model without resorting to calibration on the data set being modeled, which amounts to empirical curve fitting. The work will be performed in conjunction with SP systems, a leading UK supplier of composite materials and Airbus UK a leading UK designer and user of composite materials and structures.
|
|
Key Findings |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Potential use in non-academic contexts |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
|
Impacts |
|
| Description |
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk |
| Summary |
|
| Date Materialised |
|
|
|
|
Sectors submitted by the Researcher |
|
This information can now be found on Gateway to Research (GtR) http://gtr.rcuk.ac.uk
|
| Project URL: |
http://www.southampton.ac.uk/muvis/ |
| Further Information: |
|
| Organisation Website: |
http://www.soton.ac.uk |