EPSRC logo
EPSRC Support by Industrial Sector in Manufacturing

EPSRC classifies the research it supports by industrial relevance/sector. A list of industrial sectors and their meanings are available.

Please note that the assignment of a sector to a grant indicates that the sector may apply in whole or in part to the research activity of that grant. This means that the values of grants within a classification should not be totalled to find the total investment in that area or to compare investment between areas of research. The value shown for each grant is always the total awarded, not the proportion attributed to the individual industrial sector.

Grant TitlePrincipal
Investigator
OrganisationDepartmentTotal Grant
Value (£)
"Meta-chemistry": Nanoscale chemical control using spatially localised solvent heatingKadodwala, Professor MUniversity of GlasgowSchool of Chemistry 945,107
21st Century Prototyping: Improving product prototyping through the integration of physical and digital workflowSnider, Dr CUniversity of BristolMechanical Engineering 344,003
3D Laser Beam Shaping: The True Potential of Laser Based ManufacturingCarter, Dr RMHeriot-Watt UniversitySch of Engineering and Physical Science 585,983
3D Nanophotonics in Artificially Structured Chalcogenide MaterialsHO, Dr YDNorthumbria, University ofFac of Engineering and Environment 379,763
3D OrbiSIMS: Label free chemical imaging of materials, cells and tissuesAlexander, Professor MRUniversity of NottinghamSch of Pharmacy 2,019,330
3D Printed, Stand-alone, Colourimetric Indicator Strip (3DCIS) for Non-Invasive, On-demand Chronic Wound MonitoringMills, Professor AQueen's University of BelfastSch of Chemistry and Chemical Eng 690,274
A capability for patterning beyond-CMOS devices at atomic scalecharlton, Professor MDBUniversity of SouthamptonSch of Electronics and Computer Sci 3,141,000
A Diamond Bridge to Phase Slip PhysicsKlemencic, Dr GCardiff UniversitySchool of Physics and Astronomy 202,437
A digital COgnitive architecture to achieve Rapid Task programming and flEXibility in manufacturing robots through human demonstrations (DIGI-CORTEX)Oyekan, Dr J O JUniversity of SheffieldAutomatic Control and Systems Eng 325,453
A hybrid precision manufacturing platform for next-generation of nanoscale productsLuo, Professor XUniversity of StrathclydeDesign Manufacture and Engineering Man 766,513
A Multiscale Digital Twin-Driven Smart Manufacturing System for High Value-Added ProductsLuo, Professor XUniversity of StrathclydeDesign Manufacture and Engineering Man 2,805,908
A multi-scale, high-resolution, tri-beam facility for fast machining and 3D characterisationChiu, Professor YUniversity of BirminghamMetallurgy and Materials 1,970,213
A New Partnership in Offshore WindZhu, Professor ZUniversity of SheffieldElectronic and Electrical Engineering 3,921,689
A Platform for Hybrid Manufacturing Process researchHarris, Professor RAUniversity of LeedsMechanical Engineering 1,675,630
Accelerated Discovery and Development of New Medicines: Prosperity Partnership for a Healthier NationKerr, Professor WJUniversity of StrathclydePure and Applied Chemistry 5,495,023
Additive Manufacturing of High Performance Shaped-Profile Electrical Machine WindingsSimpson, Dr NUniversity of BristolElectrical and Electronic Engineering 332,913
ADOPT - Advancing optimisation technologies through international collaborationChachuat, Professor BImperial College LondonChemical Engineering 1,344,649
Advanced Crystal Shape Descriptors for Precision Particulate Design, Characterisation and Processing (Shape4PPD)Roberts, Professor KJUniversity of LeedsChemical and Process Engineering 968,184
Advanced Hybrid Manufacturing Platform for Carbon Nanotube Devices (ADVENTURE)De Volder, Professor MUniversity of CambridgeEngineering 252,479
Adventurous Manufacturing Follow On: Integrating Living Analytics into Biomanufacturing ProcessesPolizzi, Professor KMImperial College LondonChemical Engineering 870,445
Aerosol Deposition for Manufacturing and Developing Next Generation Dielectric Charge Storage DevicesHall, Dr DAUniversity of Manchester, TheMaterials 414,892
Aerosol Deposition for Manufacturing and Developing Next Generation Dielectric Charge Storage DevicesMilne, Professor SJUniversity of LeedsChemical and Process Engineering 458,609
Aerospace casting for the hybrid electric futureWithey, Professor PUniversity of BirminghamMetallurgy and Materials 937,245
AFM-based nano-machining: developing and validating a novel modelling approach for effective process implementation in nanotechnology applicationsBrousseau, Professor EBCardiff UniversitySch of Engineering 692,656
AI Synthesis of Structures for Additive ManufacturingMaskery, Dr IUniversity of NottinghamFaculty of Engineering 202,419
AIM3: Additive and intelligent manufacturing of multi-functional membranesTokay, Dr BUniversity of NottinghamFaculty of Engineering 1,008,679
AIOLOS: Artificial Intelligence powered framework for OnLine prOduction SchedulingLI, Dr JUniversity of Manchester, TheChem Eng and Analytical Science 833,312
AirGuide PhotonicsPetropoulos, Professor PUniversity of SouthamptonOptoelectronics Research Centre (ORC) 6,160,545
An agile bio-manufacturing platform for production of blood vasculaturePoologasundarampillai, Dr GUniversity of BirminghamDentistry 251,993
An Integrative National Infrastructure for Ultra-High-Field NMR in the Physical and Life SciencesCarlomagno, Professor TUniversity of BirminghamSch of Biosciences 6,000,000
An X-ray Diffractometer for Extreme Conditions ResearchParsons, Professor SUniversity of EdinburghSch of Chemistry 561,796
An X-ray Micro-Computed Tomography Facility with in-situ/in operando testing.Inkson, Professor BUniversity of SheffieldMaterials Science and Engineering 1,175,201
ANTENNA - Advanced tools for predictive cleaning in a world of resource scarcityWilson, Professor MRDurham, University ofChemistry 1,813,999
ATLAS - Automated high-throughput platform suite for accelerated molecular systems discoveryPetit, Professor CImperial College LondonChemical Engineering 1,281,110
ATLAS: Assurance through layer-wise anomaly sensingHooper, Dr PAImperial College LondonMechanical Engineering 608,553
Autonomous Inspection for Responsive and Sustainable Nuclear Fuel Manufacture (AIRS-NFM)Joyce, Professor MJLancaster UniversityEngineering 1,499,367
AUTONOMOUS METHOD FOR DETECTING CUTTING TOOL AND MACHINE TOOL ANOMALIES IN MACHININGLang, Professor ZUniversity of SheffieldAutomatic Control and Systems Eng 1,033,385
Autonomous Mobile Robot ChemistsCooper, Professor AUniversity of LiverpoolChemistry 690,497
Beyond direct-write: Dynamically reconfigurable holographic multibeam interference lithography for high-throughput nanomanufacturingJoyce, Dr H JUniversity of CambridgeEngineering 506,444
Biaxial Strained Transfer of Atomically Thin Nano-Electro-Mechanical MembranesVijayaraghavan, Dr AUniversity of Manchester, TheMaterials 252,814
Bio-derived and Bio-inspired Advanced Materials for Sustainable Industries (VALUED)Titirici, Professor MImperial College LondonChemical Engineering 6,139,080
Biologically Upcycling MetalsHorsfall, Professor LUniversity of EdinburghSch of Biological Sciences 1,020,945
Biomanufacturing with carbon capture and utilisation: A Zero Carbon Loss SystemXuan, Professor JLoughborough UniversityChemical Engineering 1,385,108
Bionanofabrication SuiteBoutelle, Professor MGImperial College LondonBioengineering 1,347,941
BioSMART: BIOreactor Spatial Mapping and Actuation in Real TimeRowlands, Dr CJImperial College LondonBioengineering 1,011,859
Boron: Beyond the ReagentLloyd-Jones, Professor GUniversity of EdinburghSch of Chemistry 5,012,847
Breaking FROntiers for advanced engineering of bespoke, functional Biopolymer COmposite materials (FROBCO)Xie, Dr DFNewcastle UniversitySch of Engineering 1,121,829
Brokering Additive ManufacturingGopsill, Dr J AUniversity of BristolMechanical Engineering 758,991
Brunel University - Equipment AccountFan, Professor ZBrunel University LondonMechanical and Aerospace Engineering 3,855,000
Brush seal Resistance to Inlet Swirl and Transient Loading Effects (BRISTLE)Pekris, Dr MJUniversity of SurreyMechanical Engineering Sciences 335,363
Business Model Innovation for Intelligent Automation: Unpacking the Productivity ParadoxVelu, Dr CUniversity of CambridgeEngineering 1,268,022
CBET-EPSRC: Analysis and Optical Control of Surfactant Effects for Increased Lubrication of Liquid Flows in the Cassie StatePapageorgiou, Professor DImperial College LondonMathematics 457,329
CCP TurbulenceLaizet, Professor SImperial College LondonAeronautics 263,363
Challenges to Revolutionise Hearing Device ProcessingCulling, Professor JCardiff UniversitySch of Psychology 200,474
Challenges to Revolutionise Hearing Device ProcessingBarker, Professor JUniversity of SheffieldComputer Science 371,114
Challenges To Revolutionise Hearing Device ProcessingAkeroyd, Professor MUniversity of NottinghamSchool of Medicine 251,510
Chemistry of open-shell correlated materials based on unsaturated hydrocarbonsRosseinsky, Professor MUniversity of LiverpoolChemistry 763,195
Chemobots: Digital-Chemical-Robotics to Convert Code to Molecules and Complex SystemsCronin, Professor LUniversity of GlasgowSchool of Chemistry 5,034,017
Circular Economy for Small Medical DevicesRahimifard, Professor SLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 1,546,200
Circular Economy Network+ in Transportation Systems (CENTS)Kirwan, Professor KEUniversity of WarwickWMG 1,015,576
CMMI-EPSRC - Right First Time Manufacture of Pharmaceuticals (RiFTMaP)Litster, Professor JDUniversity of SheffieldChemical & Biological Engineering 1,543,633
CMMI-EPSRC: Multi-Driver Furnace Processing of Magneto-Functional MaterialsStaunton, Professor JBUniversity of WarwickPhysics 283,132
CMMI-EPSRC: Thermoacoustic response of Additively Manufactured metals: A multi-scale study from grain to component scalesPatterson, Professor EAUniversity of LiverpoolMech, Materials & Aerospace Engineering 432,184
Cognitive Chemical ManufacturingBourne, Professor RAUniversity of LeedsChemical and Process Engineering 2,007,487
Collective Risk Learning for Supply Chain Disruption PreparednessBrintrup, Dr AUniversity of CambridgeEngineering 438,572
Combining the Strengths of Mid-IR and Raman Spectroscopies on Single Chip for Rapid Bedside Biomarker DiagnosticsGanapathy, Professor SUniversity of SouthamptonOptoelectronics Research Centre (ORC) 805,209
Composites: Made Faster - Rapid, physics-based simulation tools for composite manufactureHallett, Professor SRUniversity of BristolAerospace Engineering 812,735
Connected Everything II: Accelerating Digital Manufacturing Research Collaboration and InnovationSharples, Professor SUniversity of NottinghamFaculty of Engineering 1,415,659
Contactless Droplet Manipulation for Highly Aligned Organic SemiconductorsVolpe, Professor GUCLChemistry 941,348
Cornerstone: Mechanical Engineering Science to Enable Aero Propulsion FuturesGarvey, Professor SUniversity of NottinghamFaculty of Engineering 6,143,615
Correlative Chemical MetrologyWalker, Dr JCUniversity of SouthamptonSch of Engineering 201,990
Creation of an intelligent machining system to adapt to structural variability in safety critical titanium alloy componentsClark, Professor MUniversity of NottinghamFaculty of Engineering 577,073
Creation of an intelligent machining system to adapt to structural variability in safety critical titanium alloy componentsJackson, Professor MUniversity of SheffieldMaterials Science and Engineering 665,612
Crystallisation in the Real World: Delivering Control through Theory and ExperimentMeldrum, Professor FUniversity of LeedsSch of Chemistry 5,436,236
Data-driven, Reliable, and Effective Additive Manufacturing using multi-BEAM technologies (DREAM BEAM)Leung, Dr CUCLMechanical Engineering 399,163
DEcarbonisation of Low TemperAture Process Heat Industry, DELTA PHIEames, Professor PCLoughborough UniversityCREST 2,004,075
Delivering Enhanced Through-Life Nuclear Asset ManagementMcArthur, Professor SUniversity of StrathclydeElectronic and Electrical Engineering 2,160,698
Design and direct metal laser sintering of replacement heart valvesBressloff, Professor NWUniversity of LeedsMechanical Engineering 73,608
Design and green manufacturing of functional nanomaterialsPatwardhan, Professor SVUniversity of SheffieldChemical & Biological Engineering 1,011,132
Design theory-based nanostructured leaf-vein networks for selective VOC sensingGardner, Professor JWUniversity of WarwickSch of Engineering 412,927
Design theory-based nanostructured leaf-vein networks for selective VOC sensingBain, Professor CDDurham, University ofChemistry 383,612
Design theory-based nanostructured leaf-vein networks for selective VOC sensingHasan, Professor TUniversity of CambridgeEngineering 420,381
Designing the Future: Resilient Trans-Disciplinary Design EngineersNewnes, Professor LBUniversity of BathMechanical Engineering 1,787,703
Developing iron-rich cement clinker & understanding ferrite for the valorisation & upcycling of steel slags (FeRICH)Hanein, Dr TUniversity of SheffieldMaterials Science and Engineering 1,392,715
Developing Machine Learning-empowered Responsive Manufacture Of Industrial Laser SystemsCarter, Dr RMHeriot-Watt UniversitySch of Engineering and Physical Science 1,376,132
Development and Demonstration of an Effective Optimisation Approach for Large-scale Chemical Production SchedulingLI, Dr JUniversity of Manchester, TheChem Eng and Analytical Science 245,055
DEVELOPMENT OF A MACHINE LEARNING-ASSISTED DIGITAL TWIN PLATFORM FOR REAL-TIME OPTIMISATION OF REACTION SYSTEMS UNDER UNCERTAINTYGalvanin, Dr FUCLChemical Engineering 714,355
Dial-a-particle: model-driven self-optimised manufacturing platform of nanoparticlesTorrente Murciano, Professor LUniversity of CambridgeChemical Engineering and Biotechnology 727,398
Dialling up performance for on demand manufacturingWildman, Professor RUniversity of NottinghamFaculty of Engineering 5,865,536
Dial-up Engineered Microstructures for Advanced Additively Manufactured Metals (DEMAMM)Tuck, Professor CJUniversity of NottinghamFaculty of Engineering 1,809,056
DigiScale: Digitally driven scale up of chemical processesChamberlain, Dr TWUniversity of LeedsSch of Chemistry 970,893
Digital Design and Manufacture of Amorphous Pharmaceuticals (DDMAP)Florence, Professor AJUniversity of StrathclydeInst of Pharmacy and Biomedical Sci 1,251,700
Diode area melting - a novel re-configurable multi-laser approach for efficient additive manufacturing with enhanced thermal process controlMUMTAZ, Dr KUniversity of SheffieldMechanical Engineering 629,880
Diode-pumped Ti:sapphire lasers: a manufacturable platform for precision photonicsKemp, Professor AJUniversity of StrathclydeInst of Photonics 935,452
Direct Writing of Nanodevices: A Sustainable Route to NanofabricationLewis, Dr DJUniversity of Manchester, TheMaterials 1,405,952
Displacement Talbot Lithography: accelerating a versatile and low-cost patterning technique for precision manufacturingShields, Dr PAUniversity of BathElectronic and Electrical Engineering 727,375
Doing More With Less: A Digital Twin of state-of-the-art and emerging high value manufacturing routes for high integrity titanium alloy componentsJackson, Professor MUniversity of SheffieldMaterials Science and Engineering 2,608,542
Elastic Manufacturing systems - a platform for dynamic, resilient and cost-effective manufacturing servicesRatchev, Professor SMUniversity of NottinghamFaculty of Engineering 2,803,659
Electro-Collapse Jetting: Towards the Next Generation of Printing TechnologiesIsmail, Dr ASMQueen Mary University of LondonSchool of Engineering & Materials Scienc 296,834
Electrolysis at scale: a pathway to lower precious metal content electrolysersKing, Dr LManchester Metropolitan UniversityAdv Materials and Surface Eng Res Ctr 391,366
Enabling the next generation of millikelvin cryocooler.Smith, Professor AUCLMullard Space Science Laboratory 620,917
Enhanced Magnetic Cooling through Optimising Local InteractionsGrosche, Professor FMUniversity of CambridgePhysics 88,922
Enhanced Magnetic Cooling through Optimising Local InteractionsSaines, Dr PUniversity of KentSch of Physical Sciences 416,345
EPI2SEM: EPItaxial growth and in-situ analysis of 2-dimensional SEMiconductorsPatane, Professor AUniversity of NottinghamSch of Physics & Astronomy 2,938,943
EPSRC and MRC Centre for Doctoral Training in Mathematics for Real-World SystemsTildesley, Professor MJUniversity of WarwickMathematics 3,711,782
EPSRC and SFI Centre for Doctoral Training in Advanced Metallic Systems: Metallurgical Challenges for the Digital Manufacturing EnvironmentGoodall, Professor RUniversity of SheffieldMaterials Science and Engineering 5,474,979
'EPSRC and SFI Centre for Doctoral Training in Transformative Pharmaceutical TechnologiesStolnik-Trenkic, Professor SSUniversity of NottinghamSch of Pharmacy 6,471,451
EPSRC Capital Core Equipment Award 2020McArthur, Professor SUniversity of StrathclydeElectronic and Electrical Engineering 609,322
EPSRC Centre for Doctoral Training (CDT) in Sensor Technologies and ApplicationKaminski, Professor CUniversity of CambridgeChemical Engineering and Biotechnology 3,851,545
EPSRC Centre for Doctoral Training in Additive Manufacturing and 3D PrintingTuck, Professor CJUniversity of NottinghamFaculty of Engineering 4,620,623
EPSRC Centre for Doctoral Training in Advanced Composites for Innovation and ScienceWeaver, Professor PMUniversity of BristolAerospace Engineering 4,938,964
EPSRC Centre for Doctoral Training in Advanced Metallic Systems - Challenges in Future Metals ManufacturingGoodall, Professor RUniversity of SheffieldMaterials Science and Engineering 3,533,533
EPSRC Centre for Doctoral Training in Bioprocess Engineering LeadershipLye, Professor GUCLBiochemical Engineering 4,459,393
EPSRC Centre for Doctoral Training in Bioprocess Engineering Leadership (Complex Biological Products Manufacture)Lye, Professor GUCLBiochemical Engineering 5,898,150
EPSRC Centre for Doctoral Training in Complex Particulate Products and ProcessesRoberts, Professor KJUniversity of LeedsChemical and Process Engineering 3,668,888
EPSRC Centre for Doctoral Training in Composites ManufactureBarton, Professor JUniversity of BristolAerospace Engineering 3,765,484
EPSRC Centre for Doctoral Training in Composites Science, Engineering and ManufacturingEichhorn, Professor SUniversity of BristolAerospace Engineering 6,417,170
EPSRC Centre for Doctoral Training in Compound Semiconductor ManufacturingSmowton, Professor PMCardiff UniversitySchool of Physics and Astronomy 6,624,358
EPSRC Centre for Doctoral Training in Condensed Matter PhysicsHayden, Professor SUniversity of BristolPhysics 4,359,085
EPSRC Centre for Doctoral Training in Condensed Matter Physics: Renewal of the CM-DTCHooley, Dr CAUniversity of St AndrewsPhysics and Astronomy 4,041,683
EPSRC Centre for Doctoral Training in Diamond Science and TechnologyNewton, Professor MEUniversity of WarwickChemistry 4,602,145
EPSRC Centre for Doctoral Training in Embedded IntelligenceConway, Professor PLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 3,603,175
EPSRC Centre for Doctoral Training in Emergent Macromolecular Therapies (EMT): A National CDT linked to an EPSRC Centre for Innovative ManufacturingDalby, Professor PAUCLBiochemical Engineering 3,752,461
EPSRC Centre for Doctoral Training in Fluid Dynamics at LeedsJimack, Professor PKUniversity of LeedsSch of Computing 3,944,685
EPSRC Centre for Doctoral Training in Formulation EngineeringFryer, Professor PJUniversity of BirminghamChemical Engineering 3,640,460
EPSRC Centre for Doctoral Training in Formulation Engineering: Sustainable Structured ProductsFryer, Professor PJUniversity of BirminghamChemical Engineering 5,235,109
EPSRC Centre for Doctoral Training in Functional Industrial CoatingsSullivan, Professor JHSwansea UniversityCollege of Engineering 4,610,425
EPSRC Centre for Doctoral Training in Functional Materials: The BCFNLindsay, Dr IDUniversity of BristolPhysics 4,659,281
EPSRC Centre for Doctoral Training in Future Autonomous and Robotic Systems - FARSCOPEHauser, Dr HUniversity of BristolAerospace Engineering 4,942,724
EPSRC Centre for Doctoral Training in Future Autonomous Robotic Systems (FARSCOPE-TU: Towards Ubiquity)Hauser, Dr HUniversity of BristolAerospace Engineering 4,883,517
EPSRC Centre for Doctoral Training in Future Innovation in Non-Destructive evaluation (FIND)Drinkwater, Professor BUniversity of BristolMechanical Engineering 4,206,457
EPSRC Centre for Doctoral Training in Future Propulsion and PowerPullan, Professor GUniversity of CambridgeEngineering 7,417,109
EPSRC Centre for Doctoral Training in Graphene TechnologyFerrari, Professor ACUniversity of CambridgeEngineering 4,812,552
EPSRC Centre for Doctoral Training in Industrial Functional Coatings: COATED2Sullivan, Professor JHSwansea UniversityCollege of Engineering 2,695,470
EPSRC Centre for Doctoral Training in Industry-Inspired Photonic Imaging, Sensing and AnalysisReid, Professor DHeriot-Watt UniversitySch of Engineering and Physical Science 5,147,688
EPSRC Centre for Doctoral Training in Innovative Metal Processing IMPaCTDong, Professor HUniversity of LeicesterEngineering 3,205,827
EPSRC Centre for Doctoral Training in Inorganic Chemistry for Future Manufacturing (OxICFM)Aldridge, Professor SUniversity of OxfordOxford Chemistry 6,277,876
EPSRC Centre for Doctoral Training in Integrated CatalysisGreaney, Professor MUniversity of Manchester, TheChemistry 5,972,024
EPSRC Centre for Doctoral Training in Machining ScienceMarshall, Professor MBJUniversity of SheffieldMechanical Engineering 2,750,322
EPSRC Centre for Doctoral Training in Materials for Demanding Environmentswithers, Professor PUniversity of Manchester, TheMaterials 4,291,882
EPSRC Centre for Doctoral Training in Molecular Analytical ScienceUnwin, Professor PUniversity of WarwickChemistry 4,172,107
EPSRC Centre for Doctoral Training in Molecules to ProductMartin, Professor EBUniversity of LeedsChemical and Process Engineering 5,136,115
EPSRC Centre for Doctoral Training in Next Generation Computational ModellingRichardson, Dr ESUniversity of SouthamptonFaculty of Engineering & the Environment 3,992,775
EPSRC Centre for Doctoral Training in Quantitative NDECawley, Professor PImperial College LondonMechanical Engineering 3,072,662
EPSRC Centre for Doctoral Training in Robotics and Autonomous Systems (CDT-RAS)Hastie, Professor HFHeriot-Watt UniversityS of Mathematical and Computer Sciences 6,947,225
EPSRC Centre for Doctoral Training in Sustainable Chemical TechnologiesDavidson, Professor MGUniversity of BathChemistry 4,722,146
EPSRC Centre for Doctoral Training in Sustainable Materials and Manufacturing (EngD)Kirwan, Professor KEUniversity of WarwickWMG 3,390,304
EPSRC Centre for Doctoral Training in the Advanced Characterisation of MaterialsMcLachlan, Professor MImperial College LondonMaterials 4,442,594
EPSRC Centre for Doctoral Training in Theory and Modelling in Chemical Sciences.Wilson, Professor MUniversity of OxfordTheory and Modelling in Chem Sci CDT 4,524,762
EPSRC Centre for Doctoral Training in Topological DesignDennis, Professor MRUniversity of BirminghamSchool of Physics and Astronomy 5,712,930
EPSRC Centre for Doctoral Training in Ultra PrecisionO'Neill, Professor WUniversity of CambridgeEngineering 3,834,532
EPSRC Core Equipment Award 2022 - A multi-user XRD facility for Advanced Materials researchBerry, Professor NGUniversity of LiverpoolFaculty of Science and Engineering 873,529
EPSRC Core Equipment Call 2022 - Cranfield UniversityTerry, Professor LACranfield UniversitySchool of Water, Energy and Environment 782,722
EPSRC Network for Engineering Porous Materials at Multiple Scales (EPoMM)Bowen, Professor CUniversity of BathMechanical Engineering 262,122
EPSRC NetworkPlus In Digitalised Surface Manufacturing: Towards "World's Best" ProcessesMatthews, Professor AUniversity of Manchester, TheMaterials 1,015,120
EPSRC-SFI: Cutting Edge Analytical Solutions for Smart, Integrated, Efficient Biopharmaceutical ProductionGoodacre, Professor RUniversity of LiverpoolBiochemistry 441,613
EPSRC-SFI: Cutting Edge Analytical Solutions for Smart, Integrated, Efficient Biopharmaceutical ProductionBurgess, Dr KUniversity of EdinburghSch of Biological Sciences 443,041
EPSRC-SFI: Table Top Manufacturing of Tailored Silica for Personalised Medicine [SiPM]Patwardhan, Professor SVUniversity of SheffieldChemical & Biological Engineering 649,763
Eradicating hydrofluoric acid from metal etchingClare, Professor ATUniversity of NottinghamFaculty of Engineering 596,756
ESTEEM: Energy efficient and Safe out-of-oven manufacTuring for compositE materials with intEgrated MultifunctionalitiesZhang, Dr HQueen Mary University of LondonSchool of Engineering & Materials Scienc 395,947
Exploiting microbial cell factories for manufacturing biodegradable film packaging from recalcitrant waste streamWelton, Professor TImperial College LondonChemistry 310,825
Failure process and optimal design of hybrid adhesive joints - a microscale experimental and numerical approachHou, Dr XLancaster UniversityEngineering 217,561
Fast, efficient and reliable: digital qualification of ultrasonic inspection for safety-critical componentsHuthwaite, Dr PImperial College LondonMechanical Engineering 1,008,847
Fiberized Platforms for Integrated Nanosheet MaterialsPeacock, Professor AUniversity of SouthamptonOptoelectronics Research Centre (ORC) 598,755
Fiberized Platforms for Nanosheet MaterialsHasan, Professor TUniversity of CambridgeEngineering 368,425
First Time Concrete: Integrated digital models for right-first-time 3D concrete printing and millingKinnell, Professor PLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 1,019,149
Flash Sintering of Composite Ceramic Materials and StructuresDancer, Dr CEJUniversity of WarwickWMG 194,459
Flexible Hybrid Thermoelectric Hybrid MaterialsMcCulloch, Professor IUniversity of OxfordOxford Chemistry 474,611
Flexible Hybrid Thermoelectric MaterialsNandhakumar, Professor ISUniversity of SouthamptonSch of Chemistry 609,079
FLEXICHEM: Flexible Digital Chemical Manufacturing Through Structure/Reactivity RelationshipsBourne, Professor RAUniversity of LeedsChemical and Process Engineering 1,201,544
Flow-Xl: A New UK Facility for Analysis of Crystallisation in Flow SystemsMeldrum, Professor FUniversity of LeedsSch of Chemistry 1,129,049
From Sensing to Collaboration: Engineering, Exploring and Exploiting the Building Blocks of Embodied Intelligence - An EPSRC Programme GrantPosner, Professor IUniversity of OxfordEngineering Science 5,994,620
Fufure Vaccine Manufacturing Research Hub: Advancing the manufacture and deployment of cost effective vaccines.- additional fundingShattock, Professor RJImperial College LondonInfectious Disease 387,110
Fully Automated Platforms for Drug Nanocrystals Manufacturing via Continuous-Flow, Data-Driven Antisolvent CrystallizationMazzei, Dr LUCLChemical Engineering 1,180,387
Future Advanced Metrology HubJiang, Professor Dame XUniversity of HuddersfieldSch of Computing and Engineering 10,813,543
Future Advanced Metrology Hub - Additional FundingJiang, Professor Dame XUniversity of HuddersfieldSch of Computing and Engineering 41,971
Future Biomanufacturing Research HubScrutton, Professor NSUniversity of Manchester, TheChemistry 10,668,316
Future Compound Semiconductor Manufacturing HubSmowton, Professor PMCardiff UniversitySchool of Physics and Astronomy 10,852,672
Future Continuous Manufacturing and Advanced Crystallisation Research HubFlorence, Professor AJUniversity of StrathclydeInst of Pharmacy and Biomedical Sci 10,864,793
Future Electrical Machines Manufacturing HubJewell, Professor GUniversity of SheffieldElectronic and Electrical Engineering 10,735,962
Future Electrical Machines Manufacturing Hub - Additional FundingJewell, Professor GUniversity of SheffieldElectronic and Electrical Engineering 102,400
Future Liquid Metal Engineering HubFan, Professor ZBrunel University LondonBCAST 10,522,611
FUTURE TARGETED HEALTHCARE MANUFACTURING HUBTitchener-Hooker, Professor NUCLBiochemical Engineering 10,851,090
Future Vaccine Manufacturing Hub: Advancing the manufacture and deployment of cost effective vaccinesShattock, Professor RJImperial College LondonInfectious Disease 12,551,951
Green Energy-Optimised Printed ICsKettle, Dr JUniversity of GlasgowCollege of Science and Engineering 1,201,482
Green Recycling And re-manufacturing of Carbon fibre composites for a circular Economy (GRACE)Gong, Dr RHUniversity of Manchester, TheMaterials 784,270
Greener Aviation with Advanced Propulsion Systems (GAAPS)Filippone, Professor AUniversity of Manchester, TheMechanical Aerospace and Civil Eng 1,750,240
Harnessing the Combined Power of IR Spectroscopy and Mass Spectrometry: Development of a New Instrument for Process Analytical TechnologyDessent, Professor CUniversity of YorkChemistry 582,157
Heterogeneous Fibre Optic sensor Arrays to Monitor Composite Manufacture (H-FOAM)Gilbert, Professor JUniversity of HullElectrical and Electronic Engineering 1,011,752
'Hetero-print': A holistic approach to transfer-printing for heterogeneous integration in manufacturingSkabara, Professor PJUniversity of GlasgowSchool of Chemistry 5,541,652
High performance Wide spectral range Nanoprobe (HiWiN)Kolosov, Professor OVLancaster UniversityPhysics 745,943
High Throughput Laser Array Based Additive ManufacturingO'Neill, Professor WUniversity of CambridgeEngineering 1,798,592
High-accuracy robotic system for precise object manipulation (HARISOM)Branson III, Professor DTUniversity of NottinghamFaculty of Engineering 672,068
Highly Efficient Elastic Perovskite Solar CellsIvaturi, Dr AUniversity of StrathclydePure and Applied Chemistry 904,088
High-temperature Electromagnetic Instrumentation for Metal ProductionDavis, Professor CUniversity of WarwickWMG 317,818
High-temperature Electromagnetic Instrumentation for Metal Production (Hi-TEMP)Peyton, Professor AUniversity of Manchester, TheElectrical and Electronic Engineering 503,138
Holographic beam shaping of high power lasers for additive manufacturingWilkinson, Professor TUniversity of CambridgeEngineering 362,362
Horizon: Trusted Data-Driven ProductsKoleva, Professor BUniversity of NottinghamHorizon Digital Economy Research 4,075,506
Hub 'Science' 3: Catalysis for the Circular Economy and Sustainable ManufacturingDavidson, Professor MGUniversity of BathChemistry 3,938,126
Improving the product development process through integrated revision control and twinning of digital-physical models during prototypingHicks, Professor BJUniversity of BristolMechanical Engineering 1,653,338
Industrial Decarbonisation Research and Innovation Centre (IDRIC)Maroto-Valer, Professor MHeriot-Watt UniversitySch of Engineering and Physical Science 19,903,412
Industrial Robots-as-a-Service (IRaaS) - Resilient and responsive manufacturing systems enabled by rapidly deployable mobile robotsLohse, Professor NLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 1,436,069
Inline virtual qualification from 3D X-ray imaging for high-value manufacturingEvans, Dr LSwansea UniversityCollege of Engineering 1,025,110
Innovation Launchpad Network AFSOsborne, Dr PPUniversity of SheffieldAdvanced Manufacturing Res Centre Boeing 1,960,000
Innovative Coatings and Adhesives for Recycling (I-CARE)Slark, Professor AUniversity of SheffieldChemistry 1,526,020
Ino-Flex: Enabling ultra-large area ultra-parallel roll-to-roll transfer printing of high performance flexible inorganic semiconductor devicesSmith, Dr RMUniversity of SheffieldElectronic and Electrical Engineering 252,918
Integrated optical position and orientation sensing for manufacturing roboticsTatam, Professor RPCranfield UniversitySch of Aerospace, Transport & Manufact 1,101,012
Intelligent engineering coatings for in-manufacture and in-service monitoring of critical safety products (CoatIN)Matthews, Professor AUniversity of Manchester, TheMaterials 2,631,659
Intelligent Structures for Low Noise EnvironmentsDaley, Professor SUniversity of SouthamptonSch of Engineering 1,703,189
Investigation of fine-scale flows in composites processingLind, Dr S JUniversity of Manchester, TheMechanical Aerospace and Civil Eng 38,657
Investigation of fine-scale flows in composites processingRendall, Dr TUniversity of BristolAerospace Engineering 938,436
Invisible Customisation - A Data Driven Approach to Predictive Additive Manufacture Enabling Functional Implant PersonalisationCox, Dr SUniversity of BirminghamChemical Engineering 404,607
Ionic Liquid Ion Sources: the Flexible Ion Beamryan, Dr cUniversity of SouthamptonSch of Engineering 465,507
Laser Technologies for Future ManufacturingZervas, Professor MUniversity of SouthamptonOptoelectronics Research Centre (ORC) 1,768,136
Lasers that Learn: AI-enabled intelligent materials processingMills, Dr BUniversity of SouthamptonOptoelectronics Research Centre (ORC) 777,859
Light Element Analysis Facility - LEAFIrvine, Professor JUniversity of St AndrewsChemistry 1,550,692
LightForm: Embedding Materials Engineering in Manufacturing with Light AlloysQuinta da Fonseca, Professor JUniversity of Manchester, TheMaterials 4,827,337
Lighting the Way to a Healthy Nation - Optical 'X-rays' for Walk Through Diagnosis & TherapyBradley, Professor MUniversity of EdinburghSch of Chemistry 5,577,754
Live X-Ray imaging (LiveX)Liotti, Dr EUniversity of OxfordMaterials 942,751
Low Dimensional Electronic Device Fabrication at Low Cost over Large Areas: Follow-onFlewitt, Professor AJUniversity of CambridgeEngineering 726,748
Machining metre-sized gratings with nanometre accuracyBuscher, Professor DFUniversity of CambridgePhysics 758,973
Made Smarter Innovation - Materials Made Smarter Research CentreTodd, Professor IUniversity of SheffieldMaterials Science and Engineering 4,049,204
Made Smarter Innovation - People-Led DigitalisationNewnes, Professor LBUniversity of BathMechanical Engineering 5,037,458
Made Smarter Innovation - Research Centre for Connected FactoriesRatchev, Professor SMUniversity of NottinghamFaculty of Engineering 5,091,837
Made Smarter Innovation - Research Centre for Smart, Collaborative Industrial RoboticsLohse, Professor NLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 4,821,585
Manufacturing Bio-inspired "Artificial Wood" from (Low-Cost) Ionic LiquidsLee, Professor KImperial College LondonAeronautics 252,776
Manufacturing by Designwithers, Professor PUniversity of Manchester, TheMaterials 1,612,580
Manufacturing in Hospital: BioMed 4.0Leese, Dr H SUniversity of BathChemical Engineering 1,046,296
Manufacturing Organic-Inorganic Nanoparticle Composites with Nanoscale Precision via Directed Self-AssemblyRao, Professor AUniversity of CambridgePhysics 1,385,342
Manufacturing scalable semiconductor quantum light sourcesBennett, Professor AJCardiff UniversitySch of Engineering 1,051,315
Manufacturing solar fabrics by electronic dyeing of textiles with 2D heterostructuresCraciun, Professor MFUniversity of ExeterEngineering 253,042
Manufacturing the Future with Supercritical CO2 and Minimum Quantity LubricationTaylor, Dr CMUniversity of SheffieldAdvanced Manufacturing Res Centre Boeing 274,496
Manufacturing the Future with Supercritical CO2 and Minimum Quantity LubricationKapur, Professor NUniversity of LeedsMechanical Engineering 758,327
MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder ProcessesTodd, Professor IUniversity of SheffieldMaterials Science and Engineering 10,724,131
MAPP: EPSRC Future Manufacturing Hub in Manufacture using Advanced Powder Processes - Additional FundingTodd, Professor IUniversity of SheffieldMaterials Science and Engineering 96,000
Mechanical nanolithography without solvents - a step towards sustainable nanomanufacturingBhaskaran, Professor HUniversity of OxfordMaterials 534,486
Medical Device Prototype & Manufacture UnitJeffers, Professor JImperial College LondonMechanical Engineering 1,686,762
Microstructural engineering of piezoelectric compositesRoscow, Dr J IUniversity of BathMechanical Engineering 256,337
MISSION (Mid- Infrared Silicon Photonic Sensors for Healthcare and Environmental Monitoring)Reed, Professor GTUniversity of SouthamptonOptoelectronics Research Centre (ORC) 5,757,814
Molecular Manufacturing of Macroscopic ObjectsSmoukov, Professor SQueen Mary University of LondonSchool of Engineering & Materials Scienc 1,180,624
Multi-modal Manufacturing of Medical Devices (4MD)Hand, Professor DHeriot-Watt UniversitySch of Engineering and Physical Science 1,302,969
Multipoint Sensors for Extreme EnvironmentsFells, Dr JUniversity of OxfordEngineering Science 1,226,073
Multiscale multidimensional integrated imaging for precision laser processing (M2I2)Booth, Professor MUniversity of OxfordEngineering Science 863,618
MultiSense - Devising and Manufacturing mm-Wave High Data Rate Low Latency On-Skin TechnologiesCasson, Dr AUniversity of Manchester, TheElectrical and Electronic Engineering 617,630
MultiSense - Devising and Manufacturing mm-Wave High Data Rate Low Latency On-Skin TechnologiesBatchelor, Professor JUniversity of KentSch of Engineering & Digital Arts 657,999
Multi-User Vector Signal and Network Analysis (VSNA) InstrumentationMeenan, Professor BJUniversity of UlsterSchool of Engineering 782,502
Nano manufacturing of ultrathin membranesBoya, Dr RUniversity of Manchester, ThePhysics and Astronomy 202,437
NanoMan: Self-Optimising Nanoscale Manufacturing Platforms for Achieving Multiscale PrecisionWarren, Dr N JUniversity of LeedsChemical and Process Engineering 1,432,279
Nano-OPS Printer for High Rate Nano-Manufacturing and Support EquipmentSilva, Professor SRPUniversity of SurreyATI Electronics 1,553,822
Nanostar Sieving for Oligonucleotides Manufacture (NanoSieveOligo)Livingston, Professor AQueen Mary University of LondonSchool of Engineering & Materials Scienc 486,259
National Facility for High Speed and High Temperature X-Ray DiffractionBowen, Dr JThe Open UniversityFaculty of Sci, Tech, Eng & Maths (STEM) 644,851
National Hub in High Value Photonic ManufacturingPayne, Professor Sir DNUniversity of SouthamptonOptoelectronics Research Centre (ORC) 10,753,048
Nature-inspired bio-Syngas Technologies for Olefins SynthesisMaterazzi, Dr MUCLChemical Engineering 1,168,549
New Manufacturing Processes for More Sustainable Commodity ChemicalsTaylor, Dr RADurham, University ofChemistry 877,146
New perspectives in photocatalysis and near-surface chemistry: catalysis meets plasmonicsZayats, Professor AKings College LondonPhysics 7,902,074
New Photocatalytic C-C Bond-Forming Reactivity of Unprotected Primary AminesCresswell, Dr AJUniversity of BathChemistry 481,106
New Routes to fluorocarbons using fluoroboranesIngleson, Professor MJUniversity of EdinburghSch of Chemistry 438,549
New trimetallic nanoparticles as catalysts for the conversion of carbon dioxide to renewable fuelsHutchings, Professor GCardiff UniversityChemistry 1,530,291
New Wire Additive Manufacturing (NEWAM)Williams, Professor SWCranfield UniversitySch of Aerospace, Transport & Manufact 5,886,209
Next Generation Metrology Driven by NanophotonicsJiang, Professor Dame XUniversity of HuddersfieldSch of Computing and Engineering 5,539,716
NMR at 1.2 GHz: A World-Leading UK Facility to Deliver Advances in Biology, Chemistry, and Materials ScienceGriffin, Dr JLancaster UniversityChemistry 20,814
NMR at 1.2 GHz: A World-Leading UK Facility to Deliver Advances in Biology, Chemistry, and Materials ScienceBlanc, Professor FUniversity of LiverpoolChemistry 23,188
NMR at 1.2 GHz: A World-Leading UK Facility to Deliver Advances in Biology, Chemistry, and Materials ScienceAshbrook, Professor SEMUniversity of St AndrewsChemistry 23,907
NMR at 1.2 GHz: A World-Leading UK Facility to Deliver Advances in Biology, Chemistry, and Materials ScienceBrown, Professor SPUniversity of WarwickPhysics 16,836,161
NMR at 1.2 GHz: A World-Leading UK Facility to Deliver Advances in Biology, Chemistry, and Materials ScienceWilliamson, Dr PTFUniversity of SouthamptonSch of Biological Sciences 74,115
Non-contact scanning probe station for advanced wafer scale testing of photonic integrated circuitsMuskens, Professor OUniversity of SouthamptonSch of Physics and Astronomy 727,695
Novel 3D tailored discontinuous fibre preforms for a sustainable future in composite manufacturingYu, Dr HUniversity of BathMechanical Engineering 343,681
Novel Active Soldering; Creating Enhanced joints Near-ambient Temperature (NASCENT)Goodall, Professor RUniversity of SheffieldMaterials Science and Engineering 212,484
Novel microcapsule designs and manufacturing processesCAYRE, Dr OJUniversity of LeedsChemical and Process Engineering 395,931
Novel microcapsule designs and manufacturing processesZhang, Professor ZUniversity of BirminghamChemical Engineering 395,449
Novel microcapsule designs and manufacturing processesRouth, Professor AUniversity of CambridgeChemical Engineering and Biotechnology 397,553
NOVEL SUSTAINABLE MANUFACTURING TECHNOLOGIES FOR EFFICIENT UTILISATION OF AGRICULTURAL WASTE STREAMS IN A CIRCULAR ECONOMYLye, Professor GUCLBiochemical Engineering 1,457,226
On the Development of a Novel Approach in Modelling of Turbulent Pulsating FlowsSeddighi, Dr MLiverpool John Moores UniversitySchool of Engineering 259,481
Perceiving, Modelling and Interacting with the Object-Based WorldDavison, Professor AJImperial College LondonComputing 2,066,563
Performance-driven design of Aluminium alloys for Additive Manufacturing (PAAM)Tzanakis, Professor IOxford Brookes UniversityFaculty of Tech, Design and Environment 358,184
Performance-driven design of aluminium alloys for additive manufacturing (PAAM)Lee, Professor PUCLMechanical Engineering 335,214
Performance-driven design of aluminium alloys for additive manufacturing (PAAM)Eskin, Professor DBrunel University LondonBCAST 477,459
Plasma Microreactors: a Manufacturing Platform for Nanoscale Metal OxidesMariotti, Professor DUniversity of UlsterSchool of Engineering 679,601
Poly(ML): Machine Learning for Improved Sustainable PolymersSiviour, Professor CRUniversity of OxfordEngineering Science 506,089
Powders by design for additive manufacture through multi-scale simulationsHaeri, Dr SUniversity of EdinburghSch of Engineering 370,418
Precise deposition of complex particles for structured functional productsHare, Dr CLNewcastle UniversitySch of Engineering 218,888
Predictive Modelling for Incremental Cold Flow Forming: An integrated framework for fundamental understanding and process optimisationPearce, Professor CUniversity of GlasgowSchool of Engineering 1,232,185
PREdictive Modelling with QuantIfication of UncERtainty for MultiphasE Systems (PREMIERE)Matar, Professor OKImperial College LondonChemical Engineering 6,560,538
Predictive multiscale free energy simulations of hybrid transition metal catalystsCatlow, Professor RUCLChemistry 834,869
Predictive multiscale free energy simulations of hybrid transition metal catalystsKeal, Professor TWSTFC Laboratories (Grouped)Scientific Computing Department 682,674
Predictive multiscale free energy simulations of hybrid transition metal catalystsMulholland, Professor AJUniversity of BristolChemistry 656,986
Preventing Surface Degradation in Demanding Environmentswithers, Professor PUniversity of Manchester, TheMaterials 2,563,468
Pro2 Network+: From Prototyping to Production of Digital DevicesFraser, Professor MCUniversity of BristolComputer Science 2,659,015
Probing Multiscale Complex Multiphase Flows with Positrons for Engineering and Biomedical ApplicationsBarigou, Professor MUniversity of BirminghamChemical Engineering 5,765,129
Process Control and Novel Materials for the Reactive Jet Impingement ProcessDalgarno, Professor KWNewcastle UniversitySch of Engineering 1,145,057
Production engineering research for the manufacture of novel electronically functional yarns for multifunctional smart textilesHughes-Riley, Dr TNottingham Trent UniversitySch of Art and Design 1,322,905
Productivity and Sustainability Management in the Responsive FactoryCorney, Professor JUniversity of EdinburghSch of Engineering 1,146,222
Programmable Sensing CompositesStanley-Marbell, Professor PUniversity of CambridgeEngineering 506,089
Prosperity Partnership Call 2 Strategic Students-Dyson and Imperial CollegeDavison, Professor AJImperial College LondonComputing 419,804
Prosperity Partnership Call 2 Strategic Students-Tata Steel and Swansea UniversityBrown, Professor SSwansea UniversityCollege of Engineering 288,991
Prosperity Partnership Call 3 Strategic Students-Eli Lilly and Imperial College LondonAdjiman, Professor CSImperial College LondonChemical Engineering 657,409
Prosperity Partnership in Rapid Product DevelopmentLavery, Professor NPSwansea UniversityCollege of Engineering 2,431,506
Prosperity PartnershipsShollock, Professor BUniversity of WarwickWMG 2,647,483
Prosperity Partnerships Call 4 Strategic Students P&G and University of DurhamWilson, Professor MRDurham, University ofChemistry 79,571
Quasi-ambient bonding to enable cost-effective high temperature Pb-free solder interconnectsHaigh, Professor SJUniversity of Manchester, TheMaterials 303,232
Quasi-ambient bonding to enable cost-effective high temperature Pb-free solder interconnectsLIU, Professor CLoughborough UniversityWolfson Sch of Mech, Elec & Manufac Eng 437,621
RAPID: ReAl-time Process ModellIng and Diagnostics: Powering Digital FactoriesWoods, Professor RFQueen's University of BelfastSch of Electronics, Elec Eng & Comp Sci 403,636
RAPID: ReAl-time Process ModellIng and Diagnostics: Powering Digital FactoriesPolydorides, Dr NUniversity of EdinburghSch of Engineering 422,204
RCUK Catapult Researchers in Residence (HVM AFRC- NAMRC- AMRC- Digital) - An Accessible Residual Stress Prediction Tool for High Value ComponentsHosseinzadeh, Dr FThe Open UniversityFaculty of Sci, Tech, Eng & Maths (STEM) 50,000
RCUK Catapult Researchers in Residence award HVM AFRC - A fracture-mechanics-based Process Envelope for flow Forming ProEnFormCoules, Dr HEUniversity of BristolMechanical Engineering 50,000
RCUK Catapult Researchers in Residence award HVM AMRC - Enabling multifunctional additive manufacturing- from computer methods to productsPanesar, Dr AImperial College LondonAeronautics 50,000
RCUK Catapult Researchers in Residence award HVM CPI - Digital - Ultra fast in-line surface metrology for roll-to-roll processMuhamedsalih, Dr HUniversity of HuddersfieldSch of Computing and Engineering 50,000
RCUK Catapult RiR (HVM NAMRC)-Reducing uncertainty of in-process measure. of large compon. with embed. metrology for traceable on-machine inspectionFletcher, Dr SUniversity of HuddersfieldSch of Computing and Engineering 50,000
RCUK Catapult RiR HVM CPI-Digital-Data compressed ultrafast single-pixel microscopy for high-throughput imaging blood cell flow analysis COUNTINGWang, Dr CUniversity of KentSch of Engineering & Digital Arts 50,000
Reactive cold sintering of temperature-stable multi-phase ceramic dielectricsBoston, Dr RUniversity of SheffieldMaterials Science and Engineering 246,181
Realising Structural Power: Addressing the Manufacturing ChallengesGreenhalgh, Professor ESImperial College LondonAeronautics 504,652
Realising Structural Power: Addressing the Manufacturing ChallengesShirshova, Dr NDurham, University ofEngineering 428,241
Realising Structural Power: Addressing the Manufacturing ChallengesIvanov, Dr DUniversity of BristolAerospace Engineering 381,887
Real-time Virtual Prototypes for the Power Electronics Supply ChainEvans, Dr PLUniversity of NottinghamFaculty of Engineering 1,036,590
Reconfigurable robotics for responsive manufacture - R3MWebb, Professor PCranfield UniversitySch of Aerospace, Transport & Manufact 1,329,502
Redistributed Manufacturing in Deployed Medical Care Network PlusPhillips, Professor WEUniversity of the West of EnglandFaculty of Business and Law 1,741,421
Regenerative BioCrystallisationYang, Dr HLoughborough UniversityChemical Engineering 253,017
Re-Imagining Engineering Design: Growing Radical Cyber-Physical-Socio PhenotypesPrice, Professor MQueen's University of BelfastSch Mechanical and Aerospace Engineering 7,355,902
Reimagining Photovoltaics ManufacturingBeattie, Professor NSNorthumbria, University ofFac of Engineering and Environment 986,018
Remote, 3D ultrasonic imaging in extreme environments using 2D laser induced phased arraysStratoudaki, Dr TUniversity of StrathclydeElectronic and Electrical Engineering 324,884
RESINators - Miniature Acoustic Resonator SystemsWindmill, Professor JFCUniversity of StrathclydeElectronic and Electrical Engineering 422,394
RESINators - Miniature Acoustic Resonator SystemsFeeney, Dr AUniversity of GlasgowSchool of Engineering 22,939
Responsive Additive Manufacture to Overcome Natural and Attack-based disruption (RAMONA)Gibbons, Professor GJUniversity of WarwickWMG 1,024,124
Responsive Manufacturing of High Value Thin to Thick Films.Howse, Dr JUniversity of SheffieldChemical & Biological Engineering 2,025,997
Responsive Manufacturing: Maximising Value Through LifeNewnes, Professor LBUniversity of BathMechanical Engineering 523,467
REuse of Structural sTeel in cOnstRuction (RESTOR)Dirar, Dr SUniversity of BirminghamCivil Engineering 1,323,872
Robodome imaging for high performance manufactured aerostructuresRobson, Professor SUCLCivil Environmental and Geomatic Eng 538,247
Robodome imaging for high performance manufactured aerostructuresPiano, Dr SUniversity of NottinghamFaculty of Engineering 283,843
Robust feedback control of negative imaginary systems: From foundations to benchmark applicationsLanzon, Professor AUniversity of Manchester, TheElectrical and Electronic Engineering 475,190
Robust manufacturable antibacterial surfaces enabled by superhard plasmon-enhanced photocatalytic materials.Oulton, Professor RFMImperial College LondonPhysics 762,406
Robust manufacturable antimicrobial surfaces enabled by superhard plasmon-enhanced photocatalytic materialsEhiasarian, Professor APSheffield Hallam UniversityCollege of Business, Technology & Eng 779,069
Rockley Photonics and the University of Southampton: A Prosperity PartnershipReed, Professor GTUniversity of SouthamptonOptoelectronics Research Centre (ORC) 2,220,207
Roll-2-Roll (R2R) manufacture of multilayer planar opticsHolmes, Dr CUniversity of SouthamptonOptoelectronics Research Centre (ORC) 252,634
Rotational Vibration Assisted Increment Sheet Forming by Novel Tooling (RV-ISF)Long, Professor HUniversity of SheffieldMechanical Engineering 1,016,188
Security of Digital Twins in ManufacturingClark, Professor JAUniversity of SheffieldComputer Science 619,963
SEE MORE MAKE MORE: Secondary Electron Energy Measurement Optimisation for Reliable Manufacturing of Key MaterialsRodenburg, Professor CUniversity of SheffieldMaterials Science and Engineering 1,171,727
See More Make More: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationJepson, Dr MLoughborough UniversityMaterials 78,818
See More Make More: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationHondow, Dr NUniversity of LeedsChemical and Process Engineering 84,068
SEE MORE MAKE MORE: Secondary Electron Energy Measurement Optimised for Reliable Manufacture of Key Materials: Opportunity, Realisation, ExploitationPratt, Dr AUniversity of YorkPhysics 562,339
Seeding and Continuous Biopharmaceutical Crystallisation (SCoBiC)Heng, Professor JYImperial College LondonChemical Engineering 1,015,843
Self-learning robotics for industrial contact-rich tasks (ATARI): enabling smart learning in automated disassemblyWang, Dr YUniversity of BirminghamMechanical Engineering 298,263
SENSYCUT- Sensor Enabled Systems for Precision CuttingShokrani Chaharsooghi, Dr AUniversity of BathMechanical Engineering 1,198,919
SHUTTERING: Low carbon concrete Structures witH aUxeTic TextilE foRmworks as reinforcING elementVinai, Dr RUniversity of ExeterEngineering 1,479,462
Single Crystal Growth at WarwickBalakrishnan, Professor GUniversity of WarwickPhysics 634,595
Single-Step Plasma Jet Material DepositionCaruana, Professor DUCLChemistry 558,343
Sir Henry Royce Institute - recurrent grantwithers, Professor PUniversity of Manchester, TheEngineering and Physical Sciences 52,313,935
SPECIFIC IKC Phase 2Worsley, Professor DSwansea UniversityCollege of Engineering 2,997,633
STEP AluminiumFan, Professor ZBrunel University LondonBCAST 2,249,250
Stoichiometric rare-earth crystals for novel integrated quantum memoriesMazzera, Dr MHeriot-Watt UniversitySch of Engineering and Physical Science 379,192
STOP fibrous microplastic pollution from textiles by elucidating fibre damage and manufacturing novel textilesTausif, Dr MUniversity of LeedsSch of Design 624,583
STOP fibrous microplastic pollution from textiles by elucidating fibre damage and manufacturing novel textilesYang, Dr DUniversity of EdinburghSch of Engineering 25,678
Strategic equipment bid: Ultra high-resolution 3D and 4D X-ray imagingBlack, Professor KUniversity of LiverpoolMech, Materials & Aerospace Engineering 1,865,575
Superposition 'Chirp' Rheometry: a new technique for the rapid rheological characterisation of complex fluids with transient microstructures.Curtis, Dr DJSwansea UniversityCollege of Engineering 350,057
Supramolecular Bioinspired Responsive Materials: Exploiting Polyproline HelicesPalma, Dr AUniversity of KentSch of Physical Sciences 404,543
SUSTAIN Manufacturing HubWorsley, Professor DSwansea UniversityCollege of Engineering 10,852,989
Sustainable Additive ManufacturingWilliams, Professor SWCranfield UniversitySch of Aerospace, Transport & Manufact 1,665,172
Sustainable Catalysis for Clean GrowthWass, Professor DCardiff UniversityChemistry 2,677,823
Sustainable Coatings by Rational Design (SusCoRD)Lyon, Professor SBUniversity of Manchester, TheMaterials 2,562,030
Sustainable manufacture of biodegradable film packaging from recalcitrant waste streamsWan, Dr CUniversity of WarwickWMG 246,888
Sustainable manufacture of biodegradable film packaging from recalcitrant waste streamsPandhal, Dr JUniversity of SheffieldChemical & Biological Engineering 758,964
Sustainable manufacturing of circular economy elastomer productsChen, Professor BQueen's University of BelfastSch Mechanical and Aerospace Engineering 1,247,406
Sustainable Microbial Manufacture of Adipic Acid from Industrial and Post-Consumer WasteWallace, Dr SUniversity of EdinburghSch of Biological Sciences 1,348,312
Sustainable microwave manufacturing of functional inorganic materials (SuMMa)Cussen, Professor SUniversity of SheffieldChemical & Biological Engineering 1,683,171
Switchable Catalysis for Block Copolymer Compatibilization of Plastic WasteGarden, Dr JAUniversity of EdinburghSch of Chemistry 202,388
Switchable Polymer Manufacturing Delivering Sustainable ProductsWilliams, Professor CKUniversity of OxfordOxford Chemistry 1,577,546
SynbiCITE 2.0Kitney, Professor RImperial College LondonBioengineering 3,058,262
System Builders - Device Assembly from Nanoporous Materials Developed from Current Platform Grant (EP/J014974/1)Livingston, Professor AQueen Mary University of LondonSchool of Engineering & Materials Scienc 524,052
Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM)Kao, Dr AUniversity of GreenwichMathematical Sciences, FACH 451,915
Tailored Microstructures via Thermoelectric-Magnetohydrodynamics for Additive Manufacturing (TEAM)Lee, Professor PUCLMechanical Engineering 331,295
Taylor dispersion, Turing instability and a lubrication theory for flamesDaou, Dr JUniversity of Manchester, TheMathematics 366,584
Technology critical metal recycling using ultrasonics and catalytic etchantsAbbott, Professor AUniversity of LeicesterChemistry 970,125
Temporal Design for Additive Manufacture: GrowCADThomas-Seale, Dr LUniversity of BirminghamMechanical Engineering 237,591
Terahertz Lab-on-a-Chip for Bio-liquid AnalysisHanham, Dr SMUniversity of BirminghamElectronic, Electrical and Computer Eng 315,377
Thales-Bristol Partnership in Hybrid Autonomous Systems Engineering (T-B PHASE)Richards, Professor AUniversity of BristolComputer Science 2,050,757
The Centre in Advanced Fluid Engineering for Digital Manufacturing (CAFE4DM)Hardacre, Professor CUniversity of Manchester, TheChem Eng and Analytical Science 3,097,928
THE FUTURE COMPOSITES MANUFACTURING HUBWarrior, Professor NAUniversity of NottinghamFaculty of Engineering 10,830,792
The Future is Remanufacturing: Composites for LifeSavage, Dr LUniversity of ExeterEngineering 448,363
The Future Vaccine Manufacturing Research Hub (Vax-Hub)Micheletti, Professor MUCLBiochemical Engineering 10,031,142
The Future Vaccine Manufacturing Research Hub (Vax-Hub) - Additional FundingMicheletti, Professor MUCLBiochemical Engineering 387,035
The UK Catalysis Hub -'Core'Hutchings, Professor GCardiff UniversityChemistry 2,201,661
The UK Catalysis Hub - 'Science': 1 - Optimising, predicting and designing new CatalystsCatlow, Professor RCardiff UniversityChemistry 3,683,535
The UK Catalysis Hub - 'Science': 2 Catalysis at the Water-Energy NexusHardacre, Professor CUniversity of Manchester, TheChem Eng and Analytical Science 4,010,674
Thermal monitoring instrumentation for metal additive manufacturing - PYRAMTatam, Professor RPCranfield UniversitySch of Aerospace, Transport & Manufact 961,863
Thermal Recovery of Functional Coatings (TReFCo)Baker, Dr JSwansea UniversityCollege of Engineering 1,005,537
Topological control of soft matter using novel nano-replication manufacturingJones, Professor CUniversity of LeedsPhysics and Astronomy 1,046,439
Transforming synthetic drug manufacturing: novel processes, methods and toolsAdjiman, Professor CSImperial College LondonChemical Engineering 4,182,441
Transforming the Foundation Industries Research and Innovation Hub (TransFIRE)Jolly, Professor MCranfield UniversitySch of Aerospace, Transport & Manufact 4,836,821
Transforming the Foundation Industries: a Network+ Towards Value by InnovationReaney, Professor IMUniversity of SheffieldMaterials Science and Engineering 2,202,051
TRibology as an ENabling Technology (TRENT)Morina, Professor AUniversity of LeedsMechanical Engineering 1,538,131
Turing AI Fellowship: Advancing Multi-Agent Deep Reinforcement Learning for Sequential Decision Making in Real-World ApplicationsMontana, Professor GUniversity of WarwickWMG 1,518,509
UCL Core Equipment Award 2022Rees, Professor GEUCLOffice of Vice Provost Research 1,424,920
UK Aerospace Research Consortium NetworkGray, Professor I GCranfield UniversitySch of Aerospace, Transport & Manufact 900,994
UK Consortium on Mesoscale Engineering Sciences (UKCOMES)Luo, Professor KHUCLMechanical Engineering 338,587
UK Design for Additive Manufacturing NetworkPRADEL, Dr PLoughborough UniversityLoughborough Design School 118,020
UK FIRES: Locating Resource Efficiency at the heart of Future Industrial Strategy in the UKAllwood, Professor JMUniversity of CambridgeEngineering 5,176,328
UK Manufacturing Symbiosis NetworkPlus (UKMSN+)Batista, Dr LCAston UniversityCollege of Business and Social Sciences 892,577
UKRI Centre for Doctoral Training in Artificial Intelligence, Machine Learning and Advanced ComputingAarts, Professor GSwansea UniversityCollege of Science 5,492,189
UKRI Interdisciplinary Centre for CircularMetalFan, Professor ZBrunel University LondonBCAST 4,437,440
UKRI Interdisciplinary Circular Economy Centre For Mineral-based Construction MaterialsStegemann, Professor JAUCLCivil Environmental and Geomatic Eng 4,430,347
UKRI Interdisciplinary Circular Economy Centre for Technology Metals (TechMet)Wall, Professor FUniversity of ExeterCamborne School of Mines 4,436,180
UKRI Interdisciplinary Circular Economy Centre for Textiles: Circular Bioeconomy for Textile MaterialsBaurley, Professor SRoyal College of ArtMaterials Science Research Centre 4,436,877
UKRI National Interdisciplinary Circular Economy HubCharnley, Professor FUniversity of ExeterScience, Innov, Tech & Entrepreneurship 3,673,166
UKRI Trustworthy Autonomous Systems HubRamchurn, Professor SDUniversity of SouthamptonSch of Electronics and Computer Sci 13,569,722
Ultrafast Scanning Thermal Microscope ProbesWeaver, Professor JMRUniversity of GlasgowSchool of Engineering 201,664
Ultra-precision machining of optoelectronics and microsystems (UPROAR)Gates, Dr JCUniversity of SouthamptonOptoelectronics Research Centre (ORC) 846,058
Ultra-short pulsed laser welding - an industrially-relevant manufacturing tool for bonding IR and visible optical materialsHand, Professor DHeriot-Watt UniversitySch of Engineering and Physical Science 974,287
Ultrasonically enabled supportless 3D printing (Sonobeamer)Neale, Dr SLUniversity of GlasgowSchool of Engineering 1,015,143
Understanding attrition of irregular particles using a novel DEM simulation approachHanley, Dr KUniversity of EdinburghSch of Engineering 1,124,894
Vera: A new paradigm to enable efficient design of VERy large Aircraft structures - the key for innovative aircraft design conceptsPinho, Professor STImperial College LondonAeronautics 1,825,217
ViTac: Visual-Tactile Synergy for Handling Flexible MaterialsLuo, Dr SKings College LondonEngineering 311,503
Wafer-Scale Manufacturing of Single-Crystal Perovskite OptoelectronicsSu, Dr LQueen Mary University of LondonSchool of Engineering & Materials Scienc 253,046
Water-based adhesive for zero-waste economyGeoghegan, Professor MNewcastle UniversitySch of Engineering 252,660
Wetting of Auxetic MetamaterialsMcHale, Professor GUniversity of EdinburghSch of Engineering 439,269
Wetting of Auxetic MetamaterialsAlderson, Professor ASheffield Hallam UniversityCollege of Business, Technology & Eng 318,566
What happens when you cross LEGO and a Star Trek Replicator?Pope, Dr S AUniversity of SheffieldAutomatic Control and Systems Eng 237,248
Woodbury and Lippmann: A new approach to continuous tone and full colour non-impact printingKlein, Dr SUniversity of the West of EnglandFac of Arts Creative Ind and Education 1,238,329
X-ray Diffraction for Energy and Manufacturing MaterialsPayne, Professor DJMedical Research Council (MRC)Research Complex at Harwell 459,497

Total Number of Grants: 417
Total Value of Grants: £933,492,745

The grant value may include the cost of access to facilities (these funds are not awarded to the grant holding organisation).